The bowline makes a fixed loop in the end of a line that will not slip or tighten, and it unties easily after a heavy load. Boaters use it for a dock line loop over a piling, a loop on a fender line and a line to a ring. Tie it, seat it hard and finish it with a backup if the line is slick.
Where to use a bowline
- A loop on the end of a dock line to drop over a piling or dock post.
- A line through a ring on a dock or buoy, with the loop around the standing part, when no cleat is handy.
- A fender line or a gear line that needs a loop that stays open.
It is a general purpose knot, not a life safety one. Do not trust a bowline alone to hold a person or a heavy load over their head.
Tying it, step by step
The old rule is “the rabbit comes out of the hole, goes around the tree and goes back down the hole.”
- Leave a long working end. Make a small loop in the standing part, with the working end crossing on top. This small loop is the hole.
- Pass the working end up through the hole from underneath. This is the rabbit coming out.
- Take it behind the standing part, the tree.
- Bring it back down through the same hole, parallel to where it came up.
- Hold the working end and the loop together in one hand and pull the standing part with the other. The knot should snug into a neat shape with the tail inside the loop.
- Leave a tail at least several inches long, and longer on slippery synthetic line.
Common mistakes
- Tail too short. A short tail slips through when the knot is loaded and unloaded repeatedly.
- Tying it loose. Seat the knot firmly before you load it.
- Tying it backward. If the tail ends up outside the loop instead of inside, the knot is weaker. Redo it.
- Leaving it slack on slick line. A bowline can shake loose when the line goes slack in a wake. Add a stopper knot or a second half hitch around the standing part in that case.
- Cross loading. Pulling the loop against another loop or a hard edge can capsize the knot. Check that the load runs along the standing part.
Practice it until it is automatic
Learn it with your eyes closed, then with gloves on. At the dock in Havasu in summer, a line is hot and sun-hardened by midday, so tie it a few times before you need it in a hurry. Skills like this carry over to dock lines and anchoring.
Rigging a boat so the knots do the job
Good line and good hardware matter more than fancy knots. When you shop for a boat, look at how the bow is rigged for dock lines and anchoring, and ask to see the cleats and eyes. See our used boats. We do a full inspection before the paperwork is final and show you the reconditioning and maintenance we performed.
Related guides: How to tie a figure eight · How to tie a cleat hitch · How to use dock lines
Common questions
What is a bowline used for?
It makes a fixed loop at the end of a line that will not slip or tighten, such as a dock line loop over a piling.
Why is it called the king of knots?
It is strong for its size, easy to untie after loading and quick to tie. Sailors have used it for centuries.
Can a bowline come undone?
Yes, when the line goes slack and is loaded again, especially with slick synthetic rope. Leave a long tail and add a stopper or half hitch for security.
Can I use a bowline to tie to a cleat?
A cleat hitch is the right knot for a cleat. A bowline is for loops and for rings or pilings.
Is the bowline safe for lifting a person?
Do not rely on it for life safety. Use equipment and knots made for rescue and follow their instructions.
Next step
See what is on the lot in our used boat inventory, or call (928) 453-8833, text (928) 732-2281 or stop by 1680 Industrial Blvd in Lake Havasu City (Monday to Saturday 8 to 5, Sunday 9 to 2). Have a boat, pontoon, jet ski or trailer to sell? We consign it with no fees: we agree on a fair market value with you, and you get a check within 10 business days after the deal is funded.
