← Back to the Blog

How to Use Fenders to Protect Your Boat

Fenders sit between your hull and the dock, another boat or a piling and take the bump so your gelcoat does not. Hang them from solid cleats at the widest part of the hull, just touching the dock, and bring them in when you leave. Here is how to do it.

Choosing fenders

  • Use at least three fenders on the dock side, more on a long or heavy boat. Check the maker of the fender for size guidance for your boat.
  • Round or cylindrical fenders work well. Flat fenders can be placed where the hull is flat. Fenders with a hole through the middle can hang or be placed flat.
  • Match fender size to boat weight and dock type. A fender that is too small flattens under load and does nothing.

Hanging them, step by step

  1. Pick a solid point: a cleat or a through-bolted fitting. Not a stanchion or a lifeline, because they bend or break.
  2. Tie each fender with a clove hitch or a knot you can adjust, then finish with a half hitch so it cannot work loose. You will need to change the height when the dock changes.
  3. Set the height so the fender touches the dock at the widest part of the hull, and a little above the waterline.
  4. Space them along the hull, one near the bow, one near the stern and one at the widest part.
  5. Put them out before you come to the dock, on the side you will use, and check that the lines are clear of the water so they cannot foul your prop.

Using fenders in different places

  • At a dock or marina: see how to dock a boat at a marina. Fenders on the dock side, and keep a spare ready for the other side in case the dock changes.
  • Rafting up or tying alongside another boat: fenders on both boats and between them. Big fenders are better, and a boat raft needs good lines and fenders.
  • At a piling: a fender board or a flat fender helps, so the hull is not scratched by the piling.
  • On the lake: in Havasu, wakes from passing boats rock a boat against a dock. Check fenders after a busy weekend.

Common mistakes

  • Hanging fenders too high so they ride on top of the dock.
  • Hanging them too low so they drag in the water.
  • Tying them to a lifeline or stanchion.
  • Leaving them hanging underway. They flap, scratch the hull and collect dirt. Stow them in a locker or a bag.
  • Tying a knot that cannot be undone. Use a hitch you can release in seconds.

Fenders and the boat you choose

Gelcoat damage costs more than a set of fenders. When you shop, look for boats with cleats at the right spots and a hull shape that suits a dock. Browse used boats, or look at a Barletta or Bentley pontoon, where the tubes make tying up and fendering a different job from a V-hull.

Related guides: How to use dock lines · How to dock at a marina · How to tie a cleat hitch

Common questions

How many fenders do I need?

At least three per side for most boats, more for a large or heavy boat. Check the fender maker for guidance for your size.

How high should fenders hang?

So they touch the dock at the widest part of the hull, with the bottom just above the waterline.

What knot do I use for a fender?

A clove hitch with a half hitch finish, or any adjustable hitch you can undo quickly.

Should I leave fenders out when I am underway?

No. Bring them in and stow them. They scratch the hull and can foul the prop if the line trails.

Can I tie fenders to the rail?

Not to a stanchion or lifeline. Use a solid cleat or a through-bolted fitting.

Next step

See what is on the lot in our used boat inventory, or call (928) 453-8833, text (928) 732-2281 or stop by 1680 Industrial Blvd in Lake Havasu City (Monday to Saturday 8 to 5, Sunday 9 to 2). Have a boat, pontoon, jet ski or trailer to sell? We consign it with no fees: we agree on a fair market value with you, and you get a check within 10 business days after the deal is funded.

Browse Boats Consign Yours