To dock at a marina, slow to idle, put fenders and lines out on the dock side, plan for wind and current and approach at a shallow angle, using short bursts of power. Take your time. A boat moving slowly is easy to stop, and a missed approach costs only a second try.
Before you reach the marina
- Slow down early. Lake Havasu has no-wake rules near marinas, boat ramps and London Bridge (Go Lake Havasu boating page). The Arizona handbook defines wakeless speed as a speed that creates no wake and is never more than 5 mph (Arizona Game and Fish boater handbook).
- Brief your crew. Who steps off, who handles the bow line and who the stern line. Keep hands and feet inside the boat.
- Put out fenders and lines on the dock side. See fenders and dock lines.
- Read the wind and the current by looking at flags and how other boats lie.
Docking alongside a pier (side-tie), step by step
- Approach at a shallow angle, about 30 to 45 degrees, aiming at a point in the dock a little behind where you want the bow to end up.
- When the bow is a few feet away, shift to neutral and let the boat glide.
- On an outboard or steerable-drive boat, turn the wheel toward the dock and use a short burst of reverse to stop and bring the stern in (Mercury docking instructions).
- Pass the bow line, then the stern line, to the dock or step off with them. Do not jump with a loaded line.
- Add spring lines to stop the boat sliding fore and aft.
- Turn off the engine and shut down electronics once the boat is secure.
Backing or driving into a slip
- Slow right down and line up the slip, using the pilings and neighbors as references.
- Move in straight, using bursts of power and neutral. In a crosswind, point a little upwind so the boat drifts into line.
- Have the crew pass bow and stern lines to the pilings or cleats as the boat comes in, and keep fenders low enough to meet the pilings.
- Stop with the boat centered. Tie off on both sides with the bow and stern lines and add spring lines.
Practice at idle in an open area before you try a tight slip in a busy weekend.
Common mistakes
- Coming in too fast. Slow speeds give you control.
- Fighting the wind. Let it push the boat, and plan the approach around it.
- Fending off with arms or legs. Use fenders and a boat hook, and keep limbs inside.
- Using the engine to hold the boat against the dock while people step off. Tie up first.
- Forgetting the bow swings out when you back. A single prop turns the stern one way in reverse, so learn which way yours goes.
Choosing a boat you can dock confidently
A shorter, lighter boat is easier to handle than a large one, and pontoons catch more wind than V-hulls. Try handling in a quiet marina first, then upsize. Browse used boats. We arrange on-water demos once a buyer is ready.
Related guides: How to use dock lines · How to use fenders · Launch ramps and marinas
Common questions
How fast should I go when docking?
At idle, slow enough that you can stop in a boat length or two. Near Havasu marinas, no-wake rules apply.
What angle do I approach a dock?
A shallow angle, about 30 to 45 degrees, then straighten up with the stern.
What do I do in a crosswind?
Let the wind push the boat, approach so it drifts onto the dock and use spring lines.
Who should handle the lines?
Brief the crew before you arrive. Hand lines to the dock or step off carefully. Never jump onto a dock with a loaded line.
Should I tie the bow first or the stern?
Whichever the wind pushes away first. Often the bow, then the stern, then springs.
Next step
See what is on the lot in our used boat inventory, or call (928) 453-8833, text (928) 732-2281 or stop by 1680 Industrial Blvd in Lake Havasu City (Monday to Saturday 8 to 5, Sunday 9 to 2). Have a boat, pontoon, jet ski or trailer to sell? We consign it with no fees: we agree on a fair market value with you, and you get a check within 10 business days after the deal is funded.
