Marine vinyl lasts longest when it is rinsed after use, cleaned gently, protected against UV and kept out of direct sun when the boat is parked. In Havasu the sun is the main enemy, so shade, a cover and a UV protectant matter more than any single cleaner.
What you are protecting
Most boat seats are marine-grade vinyl over foam on a frame, stitched with UV-resistant thread. Sun fades the color, dries out the vinyl, cracks the surface and rots thread. Moisture trapped under a cover grows mildew. The foam inside breaks down with heat and water. Keep the surface clean and protected, and the material can last years.
Tools and supplies
- Mild soap made for marine vinyl, or a mild dish soap diluted in water
- Soft brush and microfiber towels
- A mildew remover made for marine vinyl
- A UV protectant made for marine vinyl (check the label for use on your material)
- A boat cover or shade, and a fresh water hose
Cleaning steps in order
- Rinse the seats with fresh water to remove dust, sunscreen and lake minerals.
- Wash with mild soap and a soft brush, working in small sections and into seams where dirt settles.
- For mildew, apply a product made for marine vinyl as directed. Test a hidden spot first. Avoid bleach, which can harm stitching and vinyl.
- Rinse and dry with a microfiber towel. Do not leave soapy water to dry on the vinyl.
- Remove sunscreen, oil and food stains promptly. They set in the heat.
- Apply a vinyl protectant with UV blockers, following the label. Wipe off excess so it is not slick.
- Let the seats dry fully before covering the boat.
What Havasu sun and heat do
Havasu heat is the backdrop for all of this. Go Lake Havasu’s climate table (credited to usclimatedata.com) shows an average July high of 109 degrees and an average August water temperature of 87 degrees (Go Lake Havasu), and the National Weather Service notes that the warmest temperature ever recorded at one of its official observing sites, 128 degrees on June 29, 1994, came from Lake Havasu City. Sun-baked vinyl gets hot to sit on and dries out faster, and dark colors fade first. A closed boat in summer heat gets hotter than the air outside, which breaks down foam and adhesives. Use a breathable cover or a shade, and open hatches and seat bases when you can so moisture and heat do not stay trapped. Monsoon storms can bring rain into an open boat, so dry the seats after. Seam stitching is the first thing to fail in strong sun, so check seams at the start of the season.
Cracks, tears and repair
- Small splits can sometimes be patched with a vinyl repair kit
- Failing stitching can be re-sewn with UV-resistant marine thread
- Seats that are cracked across, with soggy or crumbling foam, usually need re-covering
When it needs a shop
- Wet or moldy foam that stays wet
- Large tears, failed seams or broken frames
- Re-covering whole seats or a bimini top. A marine upholstery shop can match your boat.
Upholstery on the boat you buy
Seats say a lot about how a boat was kept. Compare sun-facing seats with those in shade. Our pontoons from Barletta and Bentley have a lot of seating, and our current boats show how different boats have aged.
Related guides
Hull cleaning and waxing, Storing a boat or RV in Lake Havasu for the summer, Pre-season checklist.
Next step
Call us at (928) 453-8833, text (928) 732-2281, or stop by 1680 Industrial Blvd. Hours are Monday to Saturday 8 to 5 and Sunday 9 to 2. You can see our current boats, and if you have one to sell, we consign it with no fees. If you want to know what yours is worth first, start with a value estimate.
Common questions
Can I use household cleaners on boat vinyl?
Mild soap is fine. Avoid bleach, ammonia and harsh solvents, which can dry the vinyl and rot stitching.
How do I stop vinyl from cracking?
Keep it clean, apply a UV protectant, and keep it out of direct sun with a cover or shade.
How do I remove mildew?
Use a mildew remover made for marine vinyl, test a hidden spot, and dry the seats fully. Fix the moisture problem or it will return.
Should I leave the boat covered?
A breathable cover helps, but make sure the seats are dry first. Trapped moisture breeds mildew.
When should I re-cover seats?
When the vinyl is cracked, the foam is soaked or crumbling, or stitching keeps failing. A marine upholstery shop can quote it.
